Reduce beer wastage with the self regulating DraftMore

Surely you already know the problems with a draft beer installation. Sometimes it can be difficult to keep up with demand because the beer foams too much. It is also difficult to get the last beer out of the keg. Fortunately your problems can be solved with DraftMore. It makes sure that the pressure in the keg is correct according to the temperature of the beer.

That means the beer will foam with a regular consistency and makes it possible to get the last drops of beer out of the keg. This also means that you will reduce waste and maximize earnings from each keg of beer. With a DraftMore you will serve a perfect draft beer every time!

It is well known that draft beer when tapped often gives more foam than wanted

There can be many reasons for that, but in most cases it is because the CO2 pressure in the beer keg is not correct according to the temperature of the beer in the keg. Some people adjust the CO2 pressure either up or down when the temperature fluctuates, but people do not always remember to do this. That is how the problems start with either over carbonated beer foaming too much or under carbonated flat beer. The solution is a DraftMore which automatically adjusts the right CO2 pressure in the beer keg depending on the temperature.

Product for every type of beer - automatic beer regulator